PIT STOP - $10.00

Recommended Interval: Every month (or every 400 km)
 
  • Wiping the frame, fork, and wheel set.
  • Inspect frame and fork for damage or stress risers.
  • Torque all bolts to specification.
  • Check service interval for suspension components.

MP1 - $60.00

Recommended Intervals: Every 6 months (or every 1,200 km)
 
  • Adjusting brakes.
  • Adjusting shifting.
  • Adjusting headset.
  • Adjusting hubs.
  • Truing front and rear wheels.
  • Test ride for shifting and braking performance, as well as noises.
  • Wiping the frame, fork, and wheel set.
  • Inspect frame and fork for damage or stress risers.
  • Torque all bolts to specification.
  • Check service interval for suspension components.

MP2 - $100.00

Recommended Interval: Every year (or every 2,500 km.)
 
  • Bottom bracket overhaul.
  • Detailed cleaning and polishing of frame, fork, and wheels.
  • Drivetrain cleaning:
    • Remove the chain, cassette, cranks, and derailleurs.
      • Soak in a non-abrasive, non-corrosive Bio degreaser.
      • Give them a good scrubbing.
      • Dry, lubricate, and install the components back onto the bike looking like new!
  • Adjusting brakes.
  • Adjusting shifting.
  • Adjusting headset.
  • Adjusting hubs.
  • Truing front and rear wheels, radial & lateral.
  • Wiping the frame, fork, and wheel set.
  • Inspect frame and fork for damage or stress risers.
  • Torque all bolts to specification.
  • Check service interval for suspension components.
  • Test ride for shifting and braking performance, as well as noises.
Additional parts or accessories installed is an additional service charge adjusted accordingly to the maintenance package.
 

MP3 Hard Tail - $180.00

Recommended Interval: Every other year (or every 3,500 km.)
Also good for older bicycles that haven’t been tuned up for a while!
 
  • Overhaul headset with new loose ball bearings where applicable, and adjust.
  • Overhaul hubs with new loose ball bearings where applicable, and adjust.
  • Overhaul bottom bracket with new loose ball bearings where applicable, and adjust.
  • Install new brake cables and housing, or brake bleed where applicable.
  • Install new shift cables and housing and adjust.
  • Truing of front and rear wheels, radial & lateral.
  • Inspect frame and fork for damage or stress risers.
  • Torque all bolts to specification.
  • Check service interval for suspension components.
  • Detailed cleaning and polishing of frame, fork, and wheels.
  • Drivetrain Cleaning:
    • Remove the chain, cassette, cranks, and derailleurs.
    • Soak in a non-abrasive, non-corrosive Bio degreaser.
    • Give them a good scrubbing.
    • Dry, lubricate, and install the components back onto the bike looking like new!
  • Test ride for shifting and brake performance, as well as noises.
Additional parts or accessories installed is an additional service charge adjusted accordingly to the maintenance package.
Shift cables, shift housing, brake cables, SLR brake housing and or brake fluids are included, along with loose ball bearings
 

MP3 Full Suspension - $200.00

Recommended Interval: Every other year (or every 3,500 km.)
Also good for older bicycles that haven’t been tuned up for a while!
 
  • Dis-assembly of linkage system, cleaned and rebuilt. Bushings, and bearings are an additional charge.
  • Overhaul headset with new loose ball bearings where applicable, and adjust.
  • Overhaul hubs with new loose ball bearings where applicable, and adjust.
  • Overhaul bottom bracket with new loose ball bearings where applicable, and adjust.
  • Install new cables and housing, or brake bleed where applicable.
  • Install new shift cables and housing and adjust.
  • Truing of front and rear wheels, radial & lateral.
  • Inspect frame and fork for damage or stress risers.
  • Torque all bolts to specification.
  • Check service interval for suspension components.
  • Detailed cleaning and polishing of frame, fork, and wheels.
  • Drivetrain Cleaning:
    • Remove the chain, cassette, cranks, and derailleurs.
      • Soak in a non-abrasive, non-corrosive Bio degreaser.
      • Give them a good scrubbing.
      • Dry, lubricate, and install the components back onto the bike looking like new!
  • Test ride for shifting and braking performance, as well as noises.
Additional parts or accessories installed is an additional service charge adjusted accordingly to the maintenance package.
Shift cables, shift housing, brake cables, SLR brake housing and or brake fluids are included, along with loose ball bearings
 

MP4 Hard Tail Plus - $260.00

Recommended Interval: Every other year (or every 4000 km.)
A one-time extensive alternative to the Comprehensive Overhaul
 
  • Tapping and facing of the bottom bracket shell (reduces wear rate on bottom bracket.)
  • Facing and honing of the head tube (reduces wear on the headset.)
  • Milling of fork crown race (further reduces wear on the headset.)
  • Facing of disc brake mount tabs where applicable (ensures proper alignment of brake caliper to rotor.)
  • Overhaul headset with new loose ball bearings where applicable, and adjust.
  • Overhaul hubs with new loose ball bearings where applicable, and adjust.
  • Overhaul bottom bracket with new loose ball bearings where applicable, and adjust.
  • Install new cables and housing, or brake bleed where applicable.
  • Install new shift cables and housing and adjust.
  • Truing of front and rear wheels, radial & lateral.
  • Inspect frame and fork for damage or stress risers.
  • Torque all bolts to specification.
  • Check service interval for suspension components.
  • Detailed cleaning and polishing of frame, fork, and wheels.
  • Drivetrain Cleaning:
    • Remove the chain, cassette, cranks, and derailleurs.
      • Soak in a non-abrasive, non-corrosive Bio degreaser.
      • Give them a good scrubbing.
      • Dry, lubricate, and install the components back onto the bike looking like new!
  • Test ride for shifting and braking performance, as well as noises.
Additional parts or accessories installed is an additional service charge adjusted accordingly to the maintenance package.
Shift cables, shift housing, brake cables, SLR brake housing and or brake fluids are included, along with loose ball bearings
 

MP4 Full Suspension Plus - $280.00

Recommended Interval: Every other year (or every 4000 km.)
A one-time extensive alternative to the Comprehensive Overhaul.
 
  • Disassembly of linkage system, cleaned and rebuilt. Bushings, and bearings are an additional charge.
  • Tapping and facing of the bottom bracket shell (reduces wear rate on bottom bracket.)
  • Facing and honing of the head tube (reduces wear on the headset.)
  • Milling of fork crown race (further reduces wear on the headset.)
  • Facing of disc brake mount tabs where applicable (ensures proper alignment of brake caliper to rotor.)
  • Overhaul headset with new open bath ball bearings where applicable.
  • Overhaul front and rear hubs with new open bath ball bearings where applicable.
  • Overhaul bottom bracket with new ball bearings where applicable.
  • Install new cables and housing, or brake bleed where applicable.
  • Install new shift cables and housing and adjust.
  • Truing of front and rear wheels, radial & lateral.
  • Inspect frame and fork for damage or stress risers.
  • Torque all bolts to specification.
  • Check service interval for suspension components.
  • Detailed cleaning and polishing of frame, fork, and wheels.
  • Drivetrain Cleaning:
    • Remove the chain, cassette, cranks, and derailleurs.
      • Soak in a non-abrasive, non-corrosive Bio degreaser.
      • Give them a good scrubbing!
      • Dry, lubricate, and install the components back onto the bike looking like new!
  • Test ride for shifting and braking performance, as well as noises.
 
Additional parts or accessories installed is an additional service charge adjusted accordingly to the maintenance package.
Shift cables, shift housing, brake cables, SLR brake housing and or brake fluids are included, along with loose ball bearings